Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,
It’ll cost you between $500 and $1,000 to paint the exterior yourself. Not including paint, it’ll cost you no more than $200 to $300 at a home improvement store like Home Depot, Lowes or Menards. You may end up spending more if you buy high-quality products from specialized shops. Professionals can get the same supplies for about half what you’ll pay.
Consider credentials. Before you hire someone, consider his credentials. Membership in a trade or local business group, for example, isn’t a guarantee of quality work, but it shows a level of commitment and reliability on his part. Also verify whether the pro has the appropriate license(s). (You’ll find the licensing information in your state at the Contractor’s License Reference Site. Also check with the Better Business Bureau, the attorney general’s office in your state, or a local consumer-affairs agency to learn whether the contractor has a history of unresolved complaints. House Painting CO
The rule of thumb has always been to apply a good coat of primer, sand, then apply your color coats. This is still a good rule to follow, but new paint technologies have combined primer and paint into one product, which manufacturers assert will cut down on the number of coats you will have to apply. This newer paint is more expensive, but may be comparable to the purchase of separate primer and paint. Look at reviews of these newer paints, particular from folks that have used it in your area. House Painters CO
Receive for your contractor’s license. Once you’ve passed your licensing exam, registered your business through the proper channels and shown proof of liability insurance, you can submit an official application to receive your contractor’s license. This can be done online or by mail. Following a short review process, you’ll be issued your license, after which you can get to work securing jobs and building your business’s reputation.[17]
The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture. Home Painting
Homeowners report that painting a home’s exterior costs an average of $2,869 with a typical range between $1,715 and $4,025. The average price per square foot ranges from $0.50 to $3.50 depending on your location, condition of your exterior and accessibility. Stucco and brick cost an average of $1 per square foot more than vinyl or wood. The average 2,500 square feet home costs an average of $4,000, though it can range from $1,250 to $8,750.
Mixing multiple cans of the same color of paint into a larger container, such as a five-gallon bucket, will help ensure a uniform color is applied to your home's exterior. This step, called boxing the paint, is a method the pros follow. This step is important if, for example, you initially bought a gallon or two of paint less than you needed and then picked up the extra gallons at a later time. Home Painting
Register your business. The final step to becoming operational is to actually form a business entity. Usually, this is as simple as filling out a few forms with the Business Services Division of your local government. Private contractors will need to file for sole proprietorship, which means you'll be recognized as having full ownership of the company.[18] Home Painting

Expect to pay between $600 to $3,500 or $1.25 to $3 per square foot to coat vinyl, with prices likely increasing for the finish. It is one of the more inexpensive siding materials to have repainted, especially with recent innovations in materials. Changing the finish on your siding is not recommended unless it's completely degraded and worn away by the weather. You can save nearly half the vinyl siding installation cost of $4 per square foot by painting rather than replacing. Before adding a new coat to vinyl siding,


Complete the EPA’s Renovation, Repair and Painting (RRP) program. As of 2010, all painting contractors in the United States must be officially certified to work with lead-based paints. The purpose of the RRP program is to inform new contractors about the risks and proper safety procedures for working on properties that contain hazardous materials.[2] House Painting
×