If there is any peeling — and there usually is somewhere — it's essential to scrape off any loose paint. This doesn't just mean the parts that are already separated from the wood and ready to fall off on their own. Each spot where paint has peeled loose needs to be scraped thoroughly until you can no longer get the sharp corner of a putty knife under any of the surrounding edges of paint. Then, the bare spot needs to be sanded until the paint edges are smooth.
So why not just paint your own home. I'm not a painter, so my wife and I take our time, buying the paint and supplies, and doing our own painting. Yes, we need to tape, and it's not perfect, but we get the satisfaction of seeing our completed work. Get the supplies, sliders for your furniture, and patience and go for it. That way YOU have control over the entire project.
I disagree with your criteria to hire a painter. A prompt returned call is nice but does not indicate the quality or fairness of the painter. As far as a written estimate, that should be more of a qualifier for the bid versus an evaluation criterion. I'm not sure one would have favorable results by hiring a painter on this basis. As far as the bidding process, change orders should ONLY be used if the customer requests additional scope (PMP 101). Angie's list should consider asking reviewers if/how much they were told to pay compared with the estimate. Unfortunately, there are a lot of contractors that are unethical and need to be accountable.

To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
This article with comments was terrific - it was so informative. I found the advice useful. It addressed specifics like the condition of the dry wall surfaces, any additional repairs such. pin holes, chalking, smoothing of wall surfaces, absorption of paint and number of coats that may be needed. It should also include insurance coverage, and reflect the clean-up afterwards. Having a written contract with the company's letterhead is a must.
Ideally, you want a variety of older and newer projects, and you especially want to check on a very recent project, such as something completed last month. When you do get the references list, don’t take the information for granted. Take a few minutes to check these references. Ask these homeowners about the experience while services were provided and also how well the job has held up over time.
FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.

Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
If less than half the old paint is left, however, it may be worth stripping it all off. Guertin gets rid of stubborn remnants using shrouded grinders (like the PaintShaver), infrared paint strippers (such as the Speedheater), or chemical strippers (like Multi-Strip), then smooths the wood with a course or two of sanding. When siding (or bank accounts) can't take the shock of a total strip job, Rich O'Neil, of Masterwork Painting in Bedford, Massachusetts, has successfully hidden rough, well-adhered paint under Peel Bond, a thick primer.
Day-to-day tasks can consume too much time when there is little or no automation. Countless cloud-based productivity tools are available to streamline and automate your tasks. These tools can usually be put into place with little disruption to your current practices. Ultimately, integrating new automation tools will increase productivity and help you make the most […]
When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!
One of the most popular painting applications in the industry, ColorSnap suggests colors that will work in at your job site. Simply take a picture of the room, entryway or whatever else, and the software will find up to eight colors that will create a beautiful space. In addition, the program will suggest coordinating colors and help you locate the nearest Sherwin-Williams store.
Painting the exterior of your home is a very important aspect of owning your own home. Maintaining the exterior and interior paint protects your most prized investment from deterioration and also gives it that “wow factor” when friends and family see your paint job. Trust the Arizona Painting Company in Phoenix or Tucson to treat your home like it was our own.
A fresh paint job has the power to totally transform the look of your house in less time and for less cash than any other remodeling project. That thin skin of resin and pigment also protects your investment, shielding it from sun, wind, and rain—until the paint begins to crack and peel, that is. Then it's time to button up with a couple of new coats. Properly applied, new paint should last for a good 15 years, provided you use top-quality materials, apply them with care (and with an eye on the weather), and, most important, clean and sand every surface first. Here's what you need to know to get a first-class finish on your home's exterior.
Good contracts include descriptions of prep work and repairs; paint specs by brand name, type, color and product number; the number of coats; and a full description of the work, including frequently omitted items such as cabinet interiors and shutters. Minimize delays by specifying that, weather permitting, work will be continuous. Get a payment schedule that minimizes the down payment — the more payment you can withhold until the end, the more leverage you'll have to get the job done well and per your specifications. Insist that contractors provide proof that they carry both general liability and workers' compensation coverage.
Deciding which paint to use has gotten much easier now that acrylic latexes have pushed oil-based paints almost to extinction. The acrylics offer superior performance (they don't harden with age, the way oils do, so they move and breathe without blistering), they don't mildew as readily, and they emit fewer VOCs, so they comply with new air-quality regulations. They also work over both oil- and water-based primers.
The time needed to complete an exterior paint job varies depending on the size of the home, the condition of your home’s exterior, the weather conditions and type of paint used on the job. An average project lasts 3-4 days, while a complex project may take a week or more. Additional time may be needed to fix loose or damaged siding or add primer to areas without coverage. Your painter will provide a timeline that explains how long the project will last and will schedule the job to avoid inclement weather. 

Purchase surety bonds. Surety bonds essentially act as a kind of agreement between the contractor and the person hiring them that the job will be performed to standard. You can obtain these through your current insurer as a separate form of financial protection. As a contractor, many states require you to be bonded before you can begin working legally.[17]
The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.
Based in the United Kingdom, Ian Linton has been a professional writer since 1990. His articles on marketing, technology and distance running have appeared in magazines such as “Marketing” and “Runner's World.” Linton has also authored more than 20 published books and is a copywriter for global companies. He holds a Bachelor of Arts in history and economics from Bristol University.

Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!
File the necessary business documents. For starters, you’ll need a general business license to begin taking on contract work. You may also have to have other specific licenses that permit you to operate in off-limits zones or handle certain materials. A separate home business permit will be required if you plan on using your own residence as the headquarters for your contracting business.[13]
CertaPro Painters® provides a range of custom interior and exterior painting services, allowing for a smooth, seamless experience and exceptional results in every home. Whether you’re having your two-story foyer updated or refreshing the paint in your home’s bedrooms, the CertaPro Painters® team approaches every painting project with an eye for detail.
Residential house painters on the Handy platform have used countless gallons of paint and tons of brushes over the years. With a wealth of experience under their belts, they know the best, quickest and most cost-effective ways to get the work done. From how to achieve that perfect glossy finish to ensuring no paint drips onto your crown molding, you might find yourself picking up a few tips!
The Evolution System uses a 100% solids polyurea with unique technology that offers extreme adhesion, rapid cure, and maximum broadcast times. The vinyl flakes come in a variety of blends to mix and match with your choice of basecoat colors. This is one of the most popular systems for because of its wide variety of applications. Walk on in 4 hours & drive on in 24 hours.

When hiring a contractor it is always best to hire one who is personally referred to you by someone you trust. Hiring through ads or phone book is hit and miss. Check with your local paints stores, they know the good guys from the bottom feeders. Go to the stores that sell the high quality paints like Benjamin Moore(nonpareil), Pittsburg, Sherwin Williams or Glidden. Don't go the the big box stores for referrals, the people there don't know squat!
Excellent advice because there are many unskilled workers who are "trying to pull the wool over the customers eyes". One has to study about the project for which they are in need. I happen to need dry wall repair and painting done in my home and feel the advice in this article will be a great help to me in hiring someone who is ethical and does good work. Thanks.
This article is outdated. Deep based colors were an increase in price back in the 90's. Most stores have a standard price for all colors now. The problems the author are citing are outdated and rarely happen. This is the 2nd time I've seen this article being emailed out, it's irresponsible of angies list to keep sending out this poorly written and inaccurate article.
We had a bad experience with an interior painter years ago, with the crux of the problem being him overcharging us at the end for "extra work" he didn't anticipate. One thing I'd strongly recommend is making sure it's in the contract that any additional work or growth work is estimated and communicated to the owner as soon as it is identified, otherwise the owner is not liable to pay it at the end.
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
While we are happy to be recognized for our quality customer service we also realize that if we treat others the way we want to be treated then most if not all of our customers will be pleasantly surprised by using our company as their personal home painters throughout the Denver metro area. We are eager to meet many more of you this coming house painting season too.
×