Keep an eye on the new cans as they're being brought in. Make sure they look new and don't have paint in the rim of the can. If it's a five-gallon bucket, check to see whether the lid is still sealed on with the plastic strip. The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam.
To maintain a wet edge, start near a corner and run the roller up and down the full height of the wall, moving over slightly with each stroke. Move backward where necessary to even out thick spots or runs. Don’t let the roller become nearly dry; reload it often so that it’s always at least half loaded. Keep the open side of the roller frame facing the area that’s already painted. That puts less pressure on the open side of the roller, so you’re less likely to leave paint ridges when doing DIY wall painting.
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
Painting your home, both inside and out, improves its curb appeal, character and resale value. Painting is one of the quickest and easiest ways to give your home a face-lift -- and it yields some of the most dramatic results as well. If you have ever visited the painting section of your local hardware store, you know how overwhelming the multitude of paint choices can be. In addition to colors, there are finishes, stains, maintenance and other options to consider. And, if you're interested in adding a mural or trompe l'oeil, you're looking at a whole different set of choices and associated costs.
This article with comments was terrific - it was so informative. I found the advice useful. It addressed specifics like the condition of the dry wall surfaces, any additional repairs such. pin holes, chalking, smoothing of wall surfaces, absorption of paint and number of coats that may be needed. It should also include insurance coverage, and reflect the clean-up afterwards. Having a written contract with the company's letterhead is a must.
If you have ornamental or colorful trees, shrubbery or floral selections around your home you should figure their colors into the color scheme selection that is made.  These landscaping attributes will have an effect on how appealing the property is as a whole throughout the year.  Homes that have a great deal of trees can make the property darker and cast shadows onto the home.  Individuals will want to avoid darker colors for these situations.

House Painter Co

×